When it comes to selecting a load cell from a range of varieties available, you are bound to get overwhelmed when each one of them has their own benefits. Various load cell applications have their own specific needs. Hence, you should always discuss the load cell capacity needs with an expert supplier well in advance, before you make a final selection. The decision must always be based on choosing the load cell is just one step completed in the entire process of implementation. There are many types and shapes of load cells like button load cells, compressor washer and a lot more that we have discussed below. Additionally, ensure that it is accurately installed and equipped with proper instrumentation, or else you may never get accurate measurements. Refer to this load cell selection guide with it comes to making an informed choice.
- Determine your application
To do that, you need to conduct some measurements and the means of load application. The process of measurements also entail many factors like:
- Bending
- Compression
- Multi-axis
- Tension
Load cell measurements ascertain weight of tanks, durability performance, and break point tests.
- Determine your capacity requirements
Define the max amount of load capacity needed for your application and the required minimum. When defining the load cell capacity needs for your application, consider the extraneous factors. To make sure you have everything optimally, select one that is beyond the highest operating load. Additionally, you will need to check which engineering units will be needed for the process. The integrated pressure caused by the extra loads can dampen the performance of an application. This is where you will also need to compromise with the accuracy levels of an application if you don’t choose a proper load cell. If you want more high endurance applications, then select a sensor that has an optimal fatigue rating.
- Determine what your load cell needs
To choose the ideal load cell, define what your application needs. Refer to the questions:
- Is the application load static or dynamic?
- Do you want to make in line utilization of the load cell?
- Do you want to make side mounted use of load cell?
It is also determined by the shape of the device being used like:
- Compressor washer
- Button load cells
- Female/male thread
- Flange mount
- In-line
- Side mount
- Thru-hole
- Pancake
- Canister
When selecting a load cell, consider these factors so that you are making an informed decision that aligns with the requirements of the applications.
Comments are closed.